RTP and UDP/TCP-IP Firmware for TC2TR – Bootloader V3.x – SN above 8323095

 
Curent version – 5.13

  • Reads and writes EBU/Smpte LTC at 30 – 29.97 – 25 – 24 fps
  • RTP – real-time MIDI
  • Windows, Mac OS X and Linux compatible
  • Peer-to-Peer Time-code transmission

Please note that here are two versions of TC2TR hardware. These versions are identifiable by their serial number and both require a different version of firmware. This version of firmware is for all Bootloader 3.x versions of hardware with serial numbers ABOVE 8323095. 

KissBox CPU versions are related to their boot-loader version and marked accordingly on the serial number label. A boot-loader version being V3.x for example indicates a V3 type CPU. When uploading firmware to a KissBox the Editor firmware wizard will also inform you of the Boot-loader/CPU version of the connected KissBox.

It is important to check that you load the right firmware in the right box. The TC2TR should only be loaded with Firmware specifically meant for it. Using a wrong firmware file will lead to erratic behavior. Accidentally loading an incorrect type of firmware will not physically damage the KissBox, it will however stop functioning. If this has happened, it can be solved in most cases by re-loading the correct firmware.

WARNING

The new V3.2 bootloader hardware is not compatible with bootloader V3.0 firmwares. The installation of the wrong firmwares on V3.2 hardware will “brick” the unit. It will have to be returned to the factory for repair.