UDP-IP Firmware for MIDI2TR – Bootloader V3.0

 

Current version – V5.10

  • Two independent MIDI IN/MIDI OUT ports.
  • Simple UDP-IP control
  • Peer To Peer mode

 

 Please note that this firmware can not be used with the CM-MIDI units!

KissBox CPU versions are related to their boot-loader version and marked accordingly on the serial number label. A boot-loader version being V3.x for example indicates a V3 type CPU. When uploading firmware to a KissBox the Editor firmware wizard will also inform you of the Boot-loader/CPU version of the connected KissBox.

It is important to check that you load the right firmware in the right box. The MIDI2TR should only be loaded with Firmware specifically meant for it. Using a wrong firmware file will lead to erratic behavior. Accidentally loading an incorrect type of firmware will not physically damage the KissBox, it will however stop functioning. If this has happened, just load the correct firmware for the hardware version you have to render the KissBox operable again.

WARNING

The new V3.2 bootloader hardware is not compatible with bootloader V3.0 firmwares. The installation of the wrong firmwares on V3.2 hardware will “brick” the unit. It will have to be returned to the factory for repair.